|
Dodge Ram Diesel
"It looks GOOD under the HOOD!"
Components and Functions
Filter Adapter replaces old filter and directs the fuel to and from the remote filter through
the fuel transfer hoses. On all pre-1997 models the adapter spins on to the old filter stud,
and relocates the same spin-on filter to the remote filter head. On the 1997 model through
current models, the filter adapter replaces the canister, and bolts into place using the
existing filter head. The relocated filter is a spin-on filter of the same micron level
requirement. Many customers like the spin-on filter much better due to ease of use, and cost.
Remote Filter Head incorporates a check valve to ensure prime is maintained during filter
changes. This valve secures fuel prime when the filter is removed by preventing air from being
admitted to the fuel system. This will reduce the instance of hard engine starts after filter
changes. Extensive testing has shown that the check valve does not restrict fuel flow through
the system.
Diagnostic Test Ports in the remote filter head allows for quick testing of fuel lift pump
pressure, and accepts direct mounting of Fuel
Restriction Indicator to monitor fuel flow restriction through the filter.
Mirror Finished Stainless Steel Bracket -- IT SHINES!!! Mounts onto the intake manifold using
existing bolt patterns on the engine, so no drilling is involved.
| Part # |
Description |
Cummins Filter |
| PL8991 | Dodge Ram Diesel 1989, 1990, 1991 Models | FS1232 |
| PL9293 | Dodge Ram Diesel 1992, 1993 Model | FS1232 |
| PL9496 | Dodge Ram Diesel 1994, 1995, 1996 Models | FS1253 |
| PL96E | Dodge Ram Diesel 1996 California Model with EGR | FS1253 |
| PL9496C | Dodge Ram Diesel 1994, 1995, 1996 Models with Cummins Chrome Intake Manifold | FS1253 |
| PL9798 | Dodge Ram Diesel 1997, 1998 Models | FS1253 with 381852-S sensor |
| PL9798E | Dodge Ram Diesel 1997, 1998 California Models with EGR | FS1253 with 381852-S sensor |
| PL9899ISB | Dodge Ram Diesel 1998 and 1999 Model with Cummins 24-valve ISB | FS19519 with 381852-S sensor |
| PL2000ISB | Dodge Ram Diesel 2000 Model to Current (The water in fuel sensor stays in the same place, so this kit does not require sensor.) | FS19519 |
Filter Specifications
For PL9798, PL9798E, and PL9899ISB the "Prime-Loc" kit converts the filter from the canister
filter to a spin-on filter, when this is done you must ensure that you purchase your first
filter with a water indicator sensor and drain-valve. Ask your dealer for details when you
purchase your kit. Also be sure they recommend the proper filter. Be sure the micron levels
meet with O.E.M. specifications. (You dealer will handle this for you, just be sure to remind
them.)
|
